1- More economic comparing with regular fences that using bricks
Regular fences cost a lot of resources (formwork, concrete , bricks , mortar etc....) and construction workers to build that fence and after all the fence does not meet your requirements due to Implementation of structural or architectural or both of them , because quality control is very difficult especially in site casting.
Cretematic fences depend on designed reinforced concrete only so no more timber formwork, bricks ,mortar and concrete material or any human resource to launch them all.
Cretematic fences can meet your requirements easily by knowing what do you need and when you need to finish it .
2-saving time and construction resources comparing with regular construction method
Generally time factor is almost more important than economical so Cretematic fences is taking into consideration the time factor
Cretematic fences reduce the schedule of the project in range of (50 % - 60%) from the original specified time for completion of the project.
It saves much more time and resources comparing with regular construction method.
It saves cost of material resources which does not need a lot of resources used to build fences , It can save up to (40%-50%) from the original material resources cost
Also it saves cost of human resources which does not need a lot of construction workers (labor for concrete casting , brick , mortar and finishing), All what it needs is one crew (about 3 human recourses) to install fence elements so it can save up to ( 60%-75 % ) from original human resources cost.
As we are taking into consideration the time factor we can achieve from (50 to 100) meter run per day as a normal completion rate.
Finally our fences comes in fair face so it can be used as it is or applying any kind of paints ( acrylic , cement , etc .....) so it saves the resources used in finishing .
3- High durability and strength comparing with regular fences
The durability and the strength at regular fences that used brick is lower than precast fences
advantages of Cretematic fences
It had a high durability and strength comparing with regular fences (brick fences).
It's composed of separate elements so it can be released or re-installed just to meet your needs more and more.
Cretematic fences are a reinforced concrete elements (our standard wall element in 12 cm thickness) so it's higher strength, stiffness and it can be used Commercially (advertisement , etc.......).
It is safe from day zero (Installation day ) because at transportation or installation Process the element Exposed to All loads (transportation load , installation load and wind load, etc…..) in fact transportation or installation load is more higher than designed load to avoid any cracking .
4- We insure that applying isolation for all fences foundation to increase fence durability
Insulation of foundation fence (all foundation elements) contacting directly with underground soil is the most important reason that keeps its strength and durability
so Cretematic Is keen to use a high quality insulating materials to isolate all underground elements to avoid any external factors can negatively affect the strength or durability of the element such as ( underground water - salts and sulfate in the soil - etc ....)
Best consultants insist on Isolating elements contacting directly with underground soil to avoid any negative effect from the soil which affects the strength of the concrete element generally and not achieving it's purpose.
Therefore, we are keen at Cretematic to isolate the element professionally so that it is 100% isolated guaranteed from any negative effect . So Cretematic is keen to use a high quality insulating materials (bitumen - etc .....) in the process of isolating foundations
5- Our fence has a fair face so it can be applied with any kind of paints directly
According to the owner's requirements in finishing the outer surface Cretematic provide one of the next solutions:
A.Paint for fair face
The outer surface can be finished using paints (cement - acrylic - epoxy - etc ....) to meet the needs of the client in accordance with his imagination and feel that fits his goals.
Using the Printing for finishing the outer surface , It is considered one of the best ways to finish the outer surface where you can use regular geometric shapes - a special owner's Logo - a special owner's sentence -special artistic forms - etc .... can be used to give the fence more luxurious and brighter view comparing with regular fence.
AS far as Cretematic is interesting in high quality product and their related activates we use high-definition printing at finishing and high-quality painting material which gives unlimited possibilities to diversification at owner's vision.
The use of three-dimensional technique in finishing and ending the outer surface by using different templates (natural stone - geometric shapes in 3D), which makes the fence more luxurious and this is difficult to make it through regular fences due to highly expensive cost.
D.stamped logo or any decorative Sentence
Finally Cretematic fence characterized by a high capability in applying any stamped logo or decorative Sentence that serve owner's goals ,Whether that sentence or logo printed in sunken or a prominent method.